| home |
|
||||||||||
Note that all Eowave sensors are ready to use, include filtering or amplifying circuitry (when needed) and are calibrated for maximum bandwidth. They are delivered with a 2 meters-long cable with a jack TRS connector (Eobody1, 2 & 3 compatible) or a 3 pin connector (Eobody2 HF or OEM board compatible). No soldering is required. All Eowave sensors are made on demand. If you have special request, please, contact eowave.
Trigger sound, video, lights...
On/Off sensors are used to trigger events.
They emit only 2 values (0 and 127 in MIDI).
 |
Detection sensor |
 |
Footswitch |
 |
Movement |
 |
Switch |
 |
Tactile Switch Sensor |
 |
Metal Footswitch Sensor |
  |
Laser Beam + Light |
 |
Interactive carpet (on/off) |
Modulate parameters
Continuous sensors
emit continuous values (0 to 127 in MIDI) and enable to trigger and modulate parameters
Detection of presence in space
 |
Distance (0-3cm) |
 |
Distance (5-30 cm) |
|
Distance (20-80 cm) |
 |
Distance (60-150 cm) |
|
Distance (300-600 cm) |
 |
Ultrasonic sensor |
 |
SpaceControl |
| Laser Beam + Light |
|
Detection sensor |
Detection of position
 |
Position (10 cm) |
|
Position (30 cm) |
|
Position (50 cm) |
 |
Potentiometer |
 |
Expression Pedal |
 |
Flexion |
 |
Joystick |
Detection of pressure
 |
Pressure (18 mm) |
|
Pressure (46 mm) |
 |
Pressure sensor ribbon (60 cm) |
Detection of movement
|
2D-GForce accelerometer |
 |
3D-Gforce accelerometer |
|
Gyroscope 2 axis |
|
Gyroscope 5 axis |
|
Movement tilt (on/off) |
Detection of external elements
|
Light sensor |
 |
Temperature sensor |
 |
Breath sensor |
 |
Sonometer sensor (detection of sound) |
 |
Electroconductivity sensor |
 |
Biometric |
 |
Humidity sensor |
 |
CO2 sensor |
Detection of shock Other Note that depending on manufacturers, sensors appearence may be subjet to change without notice. Sensor type Number of outputs Continuous/ Active /passive Need ext. Integrated Editor parameters setting 2D GForce 2 Continuous active no yes Plug&play 3D GForce 3 Continuous active no yes Plug&play IR 1 Continuous active yes yes - the output signal can be amplified by setting the analogue zoom on 1 Light 1 Continuous passive no yes Plug&play movement 1 On/off passive no yes Plug&play detection 1 On/off active yes A gate value of 11 will reduce noise to avoid uncontrolled triggering. flexion 1 Continuous active no Yes Plug&play. Sensitivity can be set with the external trimmer. footswitch 1 On/off passive no yes Plug&play joystick 2 Continuous passive no yes - Plug&play Expression pedal 1 Continuous passive no no - Plug&play position 1 Continuous passive no yes Plug&play pressure 1 Continuous passive no yes Plug&play potentiometer 1 Continuous passive no no Plug&play Shock piezzo 1 On/off active no Yes Use a sensorbox with trigger inputs, which are sensitive to the velocity. switch 1 On/off passive no no Plug&play temperature 1 Continuous passive no no Plug&play ultrasonic 1 Continuous active yes yes Note that when using more than one, they need to be synchronized. (Only with digital I/O). Gyroscope 2 axis 2 Continuous active no yes Plug&play Gyroscope 5 axis 5 Continuous active no yes Plug&play sonometer 1 Continuous active no yes Plug&play If you have any questions about our products, feel free to contact us and we'll come back to you as soon as possible!
Piezzo
Multisensors Kits
Starter kit
Eobody3Live Sensor Controller Pack
Dancer sensor starter kit
interactive leotard for dancers
Sensors technical comparison table
on/off
power
additionnal
circuitry
- To reduce IR noise, filter the signal in the editor by setting a high filter value.
External trimmer
A gate value of 11 will reduce noise to avoid uncontrolled triggering.
- Note that you can use the inverse feature.
- the linear response of a pedal can be changed to a logarithmic or exponential response with the curve parameter.
amplifier
A gate value of 11 will reduce noise to avoid uncontrolled triggering.
A gate value of 11 reduce will noise to avoid uncontrolled triggering.