
Tech Specs
- 3 inputs : Clock , Reset, Play
- 2 outputs : Gate, CV out
- Adjustable Speed and Glide
- 8 potentiometers to adjust CV out (selectable between 0-5V or 0-10V )
- 8 switches to select, Gate, Slide and Reset
- Manual
The DIY 8 Sequencer comes as a kit, complete with through hole components to mount and solder yourself, a PCB, front panel and fittings. It should take an afternoon to build, and we recommend that you have some previous soldering experience before you try it. Our 'Bend' kit is a better choice for a solder virgin. You will find this a rewarding build, and you will have gained a funky, playable and inspiring little sequencer module.
The Mode switch allows you to select 6 different modes each one changes the switch function;
- GATE ON/OFF (outer circle LED)
- SLIDE ON/OFF (inner circle LED)
- STEP SKIP (the 2 LEDS are blinking)
- REPEAT : the switch has 4 positions (it sets how many times each step is repeated.1 (no LED)- 2 (outer circle LED) - 3 (inner circle LED) 4 (both LEDs)
- DIRECTION 1 forward, 2 backward, 3 ping-pong, 4 randomswitch, 5 set the voltage to 0-10V
- SCALES , 7 different scales are possible:1 no scale
2 chromatic
3 major
4 minor
5 pentatonic major
6 pentatonic minor
7 major chord (I III V) 8 fifths (I V)